Low pressure propane and natural gas quick disconnect components
Cover for 3/8” Male Quick-Disconnect
Cover for 3/8” Female Quick-Disconnect
For 1/2” and 3/8” size outdoor use only Propane and Nat. Gas gas quick-disconnect systems. Please make sure to have a licensed gas fitter install these with the correct gas sealant (on NPT threads) and correct torque (no sealant on flare fittings).
Low pressure propane and natural gas generator extension hoseswith quick-disconnects on both ends
These hoses are suitable for both propane and natural gas and are for connecting a generator to an existing user supplied low pressure regulator set for 7-13” w.c.
Low pressure12ft x 3/8” i.d. propaneextension hose3/8” in and 3/8” outquick-disconnects
Low pressure12ft x 1/2” i.d. pproane and natural gasextension hose1/2” in and 3/8” outquick-disconnect
ACME to POL adapter
Propane Tank Regulator/Hoses
These regulator w/hoses are suitable for connecting your generator to a 20-60lb BBQ tank by regulating the pressure to 7-11” w.c. (also known as 1/2 psi max). NOTE: Use a licensed gas fitter to check all connections and test supply pressure before connecting hose or generator. For 100lb BBQ tanks, purchase the POL to ACME tank adapter.
Low pressure6ft x 3/8” i.d. propaneSS over-braidedextension hose3/8” in and 3/8” outquick-disconnects
Low pressure12ft x 1/4” i.d. propaneextension hose1/4” in and 3/8” outquick-disconnects
Dual tank output adapter
1/4” Female Quick-Disconnect with 1/4” FNPTand shutoff lever
WARNING: For your and other’s safety, most states require a licensed plumber or gas fitter to perform work on your home or business’ propane or natural gas system. Always check with your local inspector if not sure.
Please note we are not a Honda dealer. Honda is a registered trademark of Honda Motor Co.
Low pressure12ft x 3/8” i.d. dual output propane extension hosewith 3/8” in and two 3/8” outquick-disconnects
Low pressureadapter to converta 1/4” to a 3/8”quick-disconnect(example use - to connect a 3/8”quick-disconnect hoseto a 1/4” camperquick-disconnect)